< // RETURN TO SYSTEM ROOT
RUGGED OCULUS 22 (SUPPRESSED)
ELEVATION (IN)
0.0
WINDAGE (IN)
0.0
RANGE (YDS)150
WIND (MPH)5
ALTITUDE (FT)0
TEMP (°F)59
YDDROPVELWIND
Dark Mountain Arms: Stowaway
Caliber5.7 x 28mm
ActionBolt-Action (Single Shot)
Receiver7075-T6 Billet (Angstadt Arms)
Barrel16" 4150 Chromoly 1/2-28
Length (Stowed)16.65 Inches
Leapers UTG: SCP3-UM312AOIEW
Mag / Obj3X - 12X / 44mm
Tube30mm (TS Platform)
ReticleMil-Dot (36-Color IE)
Load Verification
AE5728A40gr FMJ (0.115 BC)
Velocity (16" BBL)~2,000 fps
Rugged Oculus 22: SilencerShop Specs
Standard Mode5.25" / 6.9 oz
Short Mode3.25" / 4.3 oz
Material17-4 Stainless Steel

ADAPT™ Technology: Modular design with keyed baffles.

TACTICAL CHECKLISTS

  • Firing Sequence: Level bubble. Adjust Side AO turret.
  • Takedown Packing: Clear chamber. Unscrew barrel nut.
S&W M&P12 Technical Specifications
SKU12490
ModelM&P®12
Caliber12 Gauge
Capacity6+6 (3") or 7+7 (2-3/4")
Chamber3˝ Magnum
Barrel Length19.0"
Overall Length27.8"
Weight132.8 oz
ActionPump Action
StockFixed Synthetic
GripM&P with Interchangeable Inserts
Barrel Material4140 Chrome-Moly Steel
SafetyAmbidextrous AR-Style Selector
SightsMagpul® MBUS® Flip-Up
Choke SystemRem® Choke Thread Pattern
Color/FinishMatte Black
Choke Inventory
BuckshotCarlson's Ported .700

BULLPUP CHECKLISTS

  • Operation: MBUS 3 Large Aperture. Forceful pump rack.
TARGET DISTANCE (YDS)15
EST. SPREAD (IN)
15.0
AeroShell 33MS / 64 (Moly Grease)

STOWAWAY THREADS: Apply thin coat to barrel/receiver.

Hoppe’s No. 9 High-Viscosity Lubricating Oil

APPLICATION SCOPE: General services only. Do NOT use on threads.

M&P12 ACTION: Light coat on dual action bars and trigger groups.

STOWAWAY EXTERIOR: Wipe down Chromoly surfaces for rust barrier.

Oculus 22 Technical FAQ & Protocol
Cleaning IntervalEvery 500 Rounds

Disassembly: Use the provided tool to remove the end cap and push out the internal baffle stack.

Modular Design: Track the order of the baffles during module swap due to the "ADAPT" design.

Baffle Cleaning (Ultrasonic): Since the baffles are 17-4 stainless steel, you can safely use an ultrasonic cleaner with a 50/50 mix of Purple Power and water for about 30–60 minutes.

Manual Scrubbing: Use a brass wire brush, nylon brush, or a brass pick to remove stubborn carbon.

Tube Cleaning: Use a nylon brush and standard gun solvent (like CLP) to wipe down the interior.

Lubrication: Before reassembly, apply a light coating of white lithium grease or gun oil to the threads and the locking collar to prevent them from seizing.

WARNING: Do NOT put the outer tube in an ultrasonic cleaner if it has a Cerakote finish.

LUBRICATION PROTOCOL

  • Zero Mixing: Do not mix grease and oil.
RCW 77.15.460 PRE-DRIVE CHECKLIST

STOWAWAY (BOLT-ACTION)

  • Visual Inspection: Open bolt; verify chamber is EMPTY.

M&P12 (DUAL-TUBE PUMP)

  • Chamber Check: Rack pump fully to rear; verify EMPTY chamber.
Suppressor Interstate Compliance